Education8 min read

Why Specificity Matters More Than Force in Chiropractic

DC. Michiko Liew

DC. Michiko Liew

Principal Chiropractor · 16 November 2026

A well-delivered chiropractic adjustment is not a feat of strength. It's an exercise in precision — the right contact, the right angle, the right segment, with the minimum force needed to achieve the intended motion. In the Gonstead system, specificity is the whole point. A small, targeted force applied to the correct vertebra at the correct angle does more useful work than a much larger force applied generally across a region. Patients who arrive expecting something forceful are usually surprised by how anti-climactic a properly delivered adjustment feels.

The Force Myth

Television, YouTube clips, and social-media reels have created a particular image of chiropractic — dramatic loud cracks, theatrical positioning, visible exertion from the practitioner. That kind of footage is engaging to watch, and it's contributed to a widespread expectation that adjustments are inherently forceful events. In practice, most adjustments are quick, low-force, and surprisingly gentle. The contact lasts a fraction of a second. The patient barely has time to brace, which is part of why the adjustment doesn't hurt — the impulse is delivered before the surrounding muscles can guard against it. We sometimes have new patients tense up dramatically in anticipation, and a few seconds later open their eyes and ask, slightly puzzled, "is that it?" That puzzlement is a sign the adjustment was delivered correctly. The dramatic version isn't the standard — it's a particular style some practitioners cultivate, often more for the camera than for the patient.

What "Specific" Actually Means

"Specificity" in chiropractic isn't a buzzword. It refers to a concrete set of decisions the practitioner makes before any contact happens. Specificity means choosing one vertebra — not a region, not "the lower back", but a single named segment. It means selecting a precise contact point on that vertebra, often a transverse process, mamillary process, or spinous process, depending on the level and the desired motion. It means orienting the contact at a specific angle, called the line of drive, which corresponds to the joint's intended motion plane. And it means matching the force vector to the disc plane of that segment, so the adjustment moves the joint in a direction the joint is anatomically designed to go. Think of turning a key in a lock. If your angle is wrong, no amount of force will work — you'll just bend the key. If your angle is right, surprisingly little force is needed. Specificity is the angle. Force is just the energy that gets the joint to move once the angle is set.

Why a Small Specific Force Beats a Large General One

This is the point that most surprises patients new to Gonstead. A generalised manipulation — the kind where the practitioner cranks a region of the spine and produces several pops at once — typically moves four or five segments simultaneously. Some of those segments are the ones with the actual problem. The rest are healthy joints that didn't need adjusting. Healthy joints aren't neutral to manipulation. If you repeatedly stretch the joint capsule of a vertebra that already moves well, you can gradually loosen its supporting ligaments and make it hypermobile over time. That hypermobile segment is then more likely to develop its own problems down the line, often appearing later in care as a new complaint at a level that was originally fine. A specific Gonstead adjustment moves only the segment that needs movement. The healthy joints above and below remain undisturbed. The patient gets the targeted change they came for, without the collateral effect of mobilising tissue that didn't need it. Less, in this case, is genuinely more — both in terms of force and in terms of how many joints get involved per visit.

The Biomechanics of a Gonstead Adjustment

Here's what actually happens in the moments before and during a specific adjustment. The practitioner has already identified the level via the five-point analysis — visualisation, X-ray, Nervoscope, static palpation, and motion palpation. They know which vertebra, in which direction it has misaligned (e.g., posterior and right rotated), and what line of drive will reverse that misalignment. The patient is positioned — usually on a specialised Gonstead bench — so that the target segment is in the path of least resistance. The bench's pelvic and thoracic sections can drop, tilt, or angle to position the spine precisely. The practitioner places one or two fingers on the contact point, takes up the soft tissue slack, and delivers a brief, controlled impulse. The impulse is fast — typically faster than 200 milliseconds — which is why patients can't react in time to brace, and why a properly delivered adjustment is essentially painless. The force itself is modest. Most of the work is done by the angle and the speed, not the magnitude.

Why the Principle Matters for Vulnerable Populations

The "specificity over force" principle becomes especially important when patients can't tolerate force at all. Paediatric patients get adjustments with the pressure of testing the ripeness of a tomato — a fingertip's worth of contact, often using a soft instrument rather than a manual thrust. The angle still matters; the force is barely there. Pregnant patients are typically adjusted side-lying using the Webster technique, which avoids any prone positioning or rotational thrusting through the abdomen. The force is gentle and the line of drive is carefully controlled, but the precision is unchanged — we're still adjusting one specific level for one specific reason. Elderly patients, particularly those with osteoporosis or significant degenerative changes, are often adjusted using Activator-style instruments that deliver a low-force, high-speed impulse with no manual thrust at all. Patients with previous spinal surgery may need to avoid certain levels entirely while being adjusted at others. Across all of these populations, specificity is what scales — the force scales down to whatever is appropriate, but the requirement to identify the right level and apply the right angle does not change. A non-specific high-force adjustment that's appropriate for a healthy 25-year-old is not appropriate for a 5-year-old or a 75-year-old. A specific low-force adjustment, calibrated to the patient, is.

The Ripple Effect

One of the under-appreciated benefits of specificity is what doesn't happen. Healthy joints stay healthy. Compensatory hypermobility — where one segment becomes loose because it's been repeatedly stretched — doesn't develop. Patients who receive specific care over time don't tend to develop new problems at neighbouring levels in the way that some patients receiving generalised manipulation do. There's also a clinical-trust dimension: when a chiropractor adjusts only what genuinely needs adjusting, the patient feels the difference and learns to trust that recommendations are conservative. Patients who feel like every visit involves the same routine "everything-cracking" session usually don't stay long, and rightly so. Less is often more, and the discipline to not adjust a healthy joint is, in our view, one of the marks of a good practitioner.

FAQ

How can such a small force fix anything?

Because the limiting factor in most spinal misalignments isn't force — it's getting the right angle on the right joint. Once those are correct, the force needed to move the segment is small. The body does the rest of the work over the following hours and days as inflammation settles and tissues remodel.

Why don't all chiropractors work this way?

Different schools of chiropractic emphasise different techniques. Some prioritise generalised manipulation; some focus on specific segmental work; some use mostly instrument-based adjustments. Gonstead is one of the most analytically demanding approaches, which is part of why it isn't the most common — it requires more time per patient and more pre-adjustment analysis. We've found the tradeoff worth it.

Will I feel anything during a specific adjustment?

You'll feel the contact, the brief pressure of the setup, and a quick pulse as the impulse is delivered. Most patients describe it as anti-climactic — a quick "click" sensation, sometimes an audible release, occasionally nothing at all. Pain during the adjustment itself is uncommon and would be a reason to stop and reassess.

Is this approach safe for older or fragile patients?

Yes — and arguably more appropriate than higher-force approaches. The force can be scaled to what the patient's tissue can tolerate, while the precision of identifying the right level remains the same. For osteoporosis or significant degenerative changes, low-force instrument adjustments are typically used rather than manual thrusts.

Why does the adjustment feel anti-climactic?

Because that's what a well-delivered specific adjustment feels like. The drama isn't the point — the targeted segmental motion is. If you finished a session feeling like you'd been put through a workout, the practitioner was probably moving more joints than needed. A focused adjustment usually leaves you feeling slightly looser at the involved level, with the rest of the spine essentially untouched.

If you've been put off chiropractic by the idea of forceful manipulation, or you've tried it elsewhere and it didn't sit well, a Gonstead assessment might feel different. Our chiropractors take the time to identify exactly what needs adjusting and adjust only that. Book at Sunway Geo, Sri Petaling, or Kota Damansara.

Questions about your spine?

Talk to one of our chiropractors.

WhatsApp the branch nearest to you — we reply fast, no bots.

Related Articles

Sunway GeoSri PetalingKota Damansara